Covert BNC analog signals to HDMI signals.With audio port to input audiable signals. It only work for ANALOG CAMERA. It can't convert cable TV signal, can't convert digital camera or AHD/TVI/CVI camera, ONLY FOR ANALOG CAMERA. Before you purchase it, please check your device is an analog camera. The video converters is a must-have to keep older devices with new modern PC monitor or LCD. It takes aconnect from CVBS security camera directly to an HDMI TV, or converts old security system DVR output (analogvideo signal) to HDMI(digital video signal) for Flat Screen Monitor. COMPATIBILITY: This box composites CVBS BNC analog video signal input and 3.5mm aux audio signal input to HDMI output with a 720P/1080P switch. NOTE: 1) It's only for CVBS analog camera, can NOT fit the digital camera or AHD/TVI/CVI camera; 2) The output port is standard HDMI type A; 3) It's NOT an SDI converter, can NOT convert cable TV signal. Don't use it to connect your antenna and cable TV. SPECIFICATION: The adapter adapts 3D compensation technology: motion optimization, color Optimization and digital noise reduction. Automatically detects input signals in PAL or NTSC format, supports 720P@50/60Hz, 1080P@50/60Hz HDMI output resolution (The resolution can reach up to 1920*1080 on LED LCTV), freely switch between 4:3 and 16:9 modes. It has an exclusive 3.5mm audio port to input audible signals, which allows you to inject sounds to the CVBS cameras video signals. 2) The low-power-consumption digital chip enables the adapter to work 24-hour uninterruptedly and stablely with low heat releasing. It's a simplistic way to broadcast live video feed and perfect for real-time video monitor using CVBS protocol. Wire it as follows, CVBS CCTV camera or DVR with BNC output - coax cable - this adapter - HDMI cable - pc monitor/ Projector/ Computer. Work after easy installation without any special settings, no driver software required. NOTE: if you use a TV set as the monitor, switch the“input or source” button on the TV clicker to the HMID mode. BNC to HDMI video converter is an adpater that converts audio and video signals of 480I (NTSC) / 576I (PAL) format to 720P or 1080P high-definition HDMI signals; It transforms audio and video signals from security cameras (CVBS), VCR ,surveillance DVRs or multiplexers into HD HDMI signals for HDTV , projector or HD monitor / high-definition large-screen LED digital LCD TVs etc. The clearer and more stable image of high-definition effects will bring you 3D immersive experience .
Note:
Confirm the source device is BNC CVBS analog signal ,NOT the AHD / TVI / CVI analog signal or SDI digital signal , Please don't use it for AHD to HDMI , TVI to HDMI , CVI to HDMI or SDI to HDMI .
Check all the cables by direct connect with source and display.Check the power supply to see if it has electricity or the light is lihgting.
Specifications:
Input: BNC
Output: HDMI
Video Format: PAL/NTSC_M/NTSC4.43/SECAM/PAL-M/PAL-N
Output Resolution: 720P@50/60Hz, 1080P@50/60Hz
Max Transfer Rate: 10.2Gbps
Compatible with HDMI1.3 ,support HDCP 2.0
Power: DC/5V
Package Included:
1x BNC to HDMI Converter
1x Power Adapter
1x User Manual
It works for security CCTV CVBS Camera signals only.
DO NOT Support Analog/Digital TV Coaxial Signal !!!
This equipment CANNOT accept signals from devices like Outdoor TV Antennas, TV Cable Boxes, Digital TV Antennas, or Satellite TV Antennas etc.
Make sure your security camera supports CVBS signal output before order 1. For old CCTV, you need to check out the camera type. This converter only support CVBS Analog Camera，it can not work with HD-CVI / HD-TVI / AHD Camera . 2. For multi-mode output camera， you need swtich the output signal to CVBS mode , otherwise, it may not work ."