*Custom Fit & Important Requirement: Exclusively engineered for the Starlink Mini satellite internet kit. Please note: The original Starlink Mini adapter/mount kit is required for installation and is not included. Provides a flawless, wobble-free foundation for your setup. *Specific Roof Rack Compatibility: Securely attaches to roof racks with thicknesses ranging from 0.47" to 1.89" (12-48 mm). Specifically designed for flat, aero, or rectangular crossbars. Important: This mount is NOT intended to be attached to standard round profile bars. *Massive 500lb Capacity & Anti-Rust: Crafted from top-tier, anti-rust aluminum alloy rather than cheap plastic. Features two enhanced locking screws that deliver an incredible 500-pound holding capacity, ensuring your expensive dish survives severe storms and highway speeds. *Ultimate RV & Vanlife Companion: Transform your vehicle into a powerful mobile communication hub. Whether you are driving a camper van, caravan, or overland SUV, this heavy-duty rack mount guarantees stable, uninterrupted satellite internet anywhere off the grid. *Quick Setup & Sleek Aesthetic: Achieve a professional installation in minutes with the included hardware. The pure gray metallic finish perfectly matches your Starlink equipment, providing a clean, low-profile look that enhances the exterior of your vehicle. "SCREW INSTALLATION 1 | Download the Starlink App Scan the QR code to download the Starlink App 2 | Find Mounting Location Your Starlink needs a clear view of the sky so it can stay connected with satellites as they move overheard. Objects that obstruct the connection between your Starlink and the satellite will cause service interruptions. Use the obstructions tool in your App to ensure you have selected a suitable mounting location. You will also want to ensure your Starlink is mounted in the correct orientation relative to your vehicle as shown below. 3| Remove Kickstand Squeeze the release tab and pull it away from its fixed location. 4 | Mark the Pilot Holes Identify the installation location on your vehicle and mark the location of the 4 holes on your mobility mount using a pen or pencil. 5 | Drill the Pilot Holes Drill the holes with a 5 mm (3/16 in) drill bit. A mounting surface of at least 1.5mm thick is recommended. 6 | Screw Mount to Surface Install a washer on the end of each screw and secure the mount to surface. Using a 13mm (1/2 in) deep-welled socket is recommended. 7 | Route Cable Through Mobility Mount Route the Starlink cable through the opening in the mobility mount and out the front end. 8 | Plug in Cable and Install Starlink Plug the ethernet cable into your Starlink and ensure the ethernet cable is fully inserted. Slide your Starlink into the mount until it clicks into place. 9 | Secure Mount Using the screwdriver, drive in the two locking screws until hand tight. Removing Your Starlink If you need to remove your Starlink, back out the locking screws. Then push down on the release tab on the mount while pushing your Starlink away from you.