TWO HOTENDS THAT ACTUALLY WORK TOGETHER - The Sermoon D3 Pro shares one direct-drive extruder between both nozzles, so switching colors mid-print or laying down dissolvable supports doesn't mean stopping the job. Whether you're running prototypes, multi color models, or production parts overnight, this dual extruder 3d printer just keeps moving. It's what makers, engineers, and small-batch shops pick when a single-nozzle FDM 3d printer keeps holding up the queue. PRINTS FAST WITHOUT MAKING A MESS OF IT - Speed is one thing. Clean speed is another. The all-metal hotend pushes 32mm3/s through a hardened steel nozzle and runs up to 300mm/s with input shaping already dialed in, so when you tell this 3d printer to go fast, you still get a finished print that looks like you took your time on it. Multi color 3d printer jobs and large prototypes come off the bed sharp and accurate. No reprints, no wasted filament. 60C ENCLOSED CHAMBER FOR THE TOUGH STUFF - ABS, ASA, polycarbonate, PA-CF, PET-CF: the filaments that hold up under stress are also the ones that warp and crack on an open-frame 3d printer. The D3 Pro's heated enclosure stays at 60C, so layers bond properly and parts come out dimensionally accurate instead of curling at the corners. It runs PLA and PETG happily too, but this enclosed 3d printer really earns its keep on carbon fiber, nylons, and anything else that needs a controlled environment. LEVELS ITSELF, RELEASES PRINTS WITH A FLEX - No paper-card calibration. No Z offset to dial in. No shimming corners with bits of folded receipt. A strain sensor inside the printhead probes the bed and handles leveling automatically, and the second nozzle auto-offsets in X, Y, and Z so you're not eyeballing alignment either. When the print's done, the flexible build plate bends and the part pops off clean. A 3d printer machine that actually saves time between jobs. BUILT FOR REAL PRODUCTION, NOT JUST WEEKENDS - Camera, smart door sensor, HEPA air purifier, filament runout detection, and a 4.3-inch touchscreen - all the stuff you need when prints run 18 hours and you're not sitting next to the machine. Connect over WiFi, USB, or Ethernet and check jobs from your phone. The 290x220x300mm build volume fits full-size functional parts, and the whole setup is what professional 3d printer industrial users and small-batch shops trust for paying work. Sermoon D3 Pro 3D Printer is built for makers, engineers, and small-batch manufacturers who need professional results without the complexity of an industrial machine. With reliable dual extrusion, an enclosed heated chamber, and precision auto bed leveling, it handles complex prototypes and production runs that typical single-nozzle or beginner 3d printer models cannot keep up with. Two hotends share a single direct-drive extruder, keeping the printhead light and fast. Print in two colors, run dissolvable supports for cleaner overhangs, or chain back-to-back jobs without spool swaps. A single-side nozzle lifting system switches extrusions instantly, and an auto XYZ offset module aligns the second hotend with no manual calibration. The all-metal hotend with bimetal heatbreak and hardened steel nozzle delivers 32mm3/s flow at 300C, printing up to 300mm/s with 5000mm/s2 acceleration. Preset input shaping keeps walls clean and edges sharp at top speed. An active 60C chamber heater reduces residual stress, warping, and inter-layer cracking. You get stronger, dimensionally accurate parts in engineering filaments like ABS, ASA, PC, PA-CF, and PET-CF carbon fiber. Compatible with PLA, PETG, PET, TPU, PVA, BVOH, HIPS, PA, ABS, ASA, PC, PC-ABS, PLA-CF, PA-CF, PET-CF, metal-filled, and more. The flexible build plate grips during printing and bends for easy print release. A strain sensor probes the bed at multiple points and levels automatically - no calibration card, no Z offset. Set it once, it stays accurate. Built-in camera, smart door sensor, filament runout sensor, HEPA air purifier, and 4.3-inch touch screen keep you in control. Manage jobs via WiFi, USB, or Ethernet. SPECS
Build: 290x220x300mm | Nozzle: 0.4mm hardened steel, 300C | Heatbed: 120C | Layer: 0.1-0.35mm | Filament: 1.75mm | Power: 1300W